10. Wing-1
0. Home page
1. My family
2. Sample of KRs
3. Fuselage
4. Canopy
5. Tortledeck
6. New hangar
7. horiz-stabilizer
8. Spars
9. control
10. Wings 1
11. Wings 2
12. Wings 3
FROM SPARS TO WINGS (Wing construction)
Finilize to insert the center front spar. the inserting is only for test.
The spars insarted, no gluing for this moment.
Other view
Made in USA by Eric Pitts, Thanks Eric.
Build two stools for construct the wings.
Connect the 3 forward spars by clamps
Walking wings, testing, I found this idea in one of the builder web,
Screw the metals to the spars, by screw befor driling.
Profiles RAF48.
Front spare is almost finish.
Spar increasing
Stabilization the spar and the profiles
Walking wings, testing.
Profiles RAF48...
Breaking through
Continue
Ready for othe profiles
Glue fiberglas on the spars, Bid is 45.
The spars with fiberglass.
Glue the profiles.
Continue gluing the profiles.
Profiles after gluing and forming.
Making the foam profiles stronger by glassing.
Making the foam profiles stronger by glassing.
Making the foam floor stronger by glassing.
